|
|
|
only $3.15
|
Manufacturer: E-z-go
E-Z-GO Med/TXT Cap,plug for use in 73124-G01
|
|
|
|
|
only $49.60
|
Manufacturer: nivel
Round insulator with 5/16" hole. For Advanced motors. For E-Z-GO electric 1997-up
|
|
|
|
|
only $13.53
|
Manufacturer: E-z-go
Advanced Motor - Spring Brush used on E-Z-GO Golf Cars and Utility Vehicles Used in E-Z-GO Gas Golf Cars and Utility Vehicles, 1994 - current Including TXT, 775/875, Medalist and Titan
|
|
|
|
|
only $46.50
|
Manufacturer: Nivel
Motor harness for use with XP2125 and PDS cars with stock controllers. For E-Z-GO electric 2000-up
|
|
|
|
|
only $48.55
|
Manufacturer: E-z-go
Electric motor coupler with 19 splines. For E-Z-GO electric 1988-96 with GE motor
|
|
|
|
|
only $56.51
|
Manufacturer: E-z-go
The E-Z-GO Brush Replacement Kit is a factory replacement part used on 2000-2009 E-Z-GO Electric Vehicles. This item is manufactured to fit 36 Volt Advance brand electric motors. Used on 2000-2009 E-Z-GO Electric TXT, 640, 835, 875, 881, 4/6-Passenger Shuttle, ST Sport, ST Sport II, ST Express, C...
|
|
|
|
|
only $100.75
|
Manufacturer: Nivel
Coupler, AMD. For Advanced motors 19 spline
|
|
|
|
|
only $133.30
|
Manufacturer: nivel
Field Coil for 2 hp Advanced D.C. Motor for 1988 and newer E-Z-GO and 1980 to early 1986 Club Car FIELD COIL KIT (FLEET MODELS) mfg. part # EZ 73120-G11
|
|
|
|
|
only $147.44
|
Manufacturer: E-z-go
Brush holder Used for motors 73124G01,G02,G03,G04 & G05 also 73291G01 & G02 Used in E-Z-GO Gas Golf Cars and Utility Vehicles, 1998 - current Including TXT, Refresher, MPT 800 and Workhorse 800
|
|
|
|
|
only $547.37
|
Manufacturer: E-z-go
This motor works directly with the speed controller to power the vehicle while also enabling the vehicle to achieve maximum power and efficiency. This motor also provides the vehicle with added power for better acceleration, traveling uphill, and an overall smooth operation. This motor is an OEM ...
|
|
|
|
|
only $642.25
|
Manufacturer: nivel
Motor, AMD (Series), 36-volt (8-hp@1600 rpm) speeds up to 15 mph, 48-volt (11.4-hp@2300 rpm) speeds up to 18 mph. Internal 19 spline. For maximum performance, safety, and durability, 4 gauge cables throughout the car, heavy duty solenoid and F&R switch are requried. Minimum 400 amp controller req...
|
|
|
|
|
only $644.45
|
Manufacturer: E-z-go
This Electric Motor is an OEM (Original Equipment Manufacturer) replacement motor manufactured for installation on E-Z-GO 2000-current fleet speed vehicles with a PDS (Precision Drive System) Controller. This motor replaces Part# 73124G08. Used on 2000-current E-Z-GO Fleet Speed Vehicles with PDS...
|
|
|
|
|
only $651.00
|
Manufacturer: GE motors
Motor, AMD (Sepex), 36-volt (4.45-hp@3570 rpm) stock replacement. Can also be used on 48-volt. For E-Z-GO 36-volt PDS/DCS
|
|
|
|
|
only $766.25
|
Manufacturer: E-z-go
Upgrade from a standard motor for E-z-go 36v-2.5 HP 3300 RPM 19 spline. Speeds up to 17 mph with standard controller. Not for DCS or PDS systems. Also fits Colubia Par Car, Melex and Yamaha G14 & G16.
|
|
|
|
|
only $766.25
|
Manufacturer: GE Motors
GE 48-volt (4hp @ 4400 rpm) industrial series, internal 19 spline motor. For E-Z-GO 1988-up series cars and other Dana axle cars. Requires 400 amp controller
|
|
|
|
|
only $774.00
|
Manufacturer: ge motors
E-z-go 8hp with 1600rpm for 36volt fleet systems. For maximum performance, safety, and durability, 4 gauge cables throughout the car, H.D. solenoid & F&R switch are required Application: Torque\\Lifted Cars 4-pass kit or utility box 36V, stock gears & tires, up to 15 mph 36V, stock gears & tires,...
|
|
|
|
|
only $775.00
|
Manufacturer: Nivel
36-volt (12hp@1300rpm) high torque motor. For E-Z-GO PDS,DCS. This motor requires an upgraded controller # 876, 877, 878. For maximum performance, ...
|
|
|
|
|
only $789.50
|
Manufacturer: Nivel
GE motor, high speed, series 36-volt (6.1hp@5330rpm) Controller upgrade suggested, also 4 gauge cables and high amp for F&R set up. The RAPTOR. For...
|
|
|
|
|
only $812.20
|
Manufacturer: nivel
Motor, AMD (Sepex), 36-volt, (12-hp@1300 rpm) High torque motor. Requires upgraded controller (must use #879). For maximum performance, safety, and durability, 4 gauge cables throughout the car, heavy duty solenoid are requried. For E-Z-GO electric PDS/DCS
|
|
|
|
|
only $909.09
|
Manufacturer: E-z-go
Vented ADC HS Series Electric Motor is the ideal motor for use on 1994-2003 E-Z-GO Electric TXT Models. This motor is not compatible with DCS (Drive Control System) or PDS (Precision Drive System) Vehicles. This Motor Series fits vented high speed Advance motor.
|
|