Rainbow Custom Cars Inc. Golf Cart Superstore
Forget about problems with stripped brake hubs on your E-Z-GO. Ausco has developed an upgrade kit which is much harder than the standard factory hub/drum combination resulting in much longer life and is far less likely to experience the stripping issues as with factory units. The brake hub/drum upgrade kit by Ausco is designed for 4 cycle gas E-Z-GO golf cars, personnel carriers, and small wheel utility trucks made from 1991 to present. This kit replaces the standard hub/drum combination with a separate hardened hub and drum. Click on the picture to see the parts mated together.
Replaces E-Z-GO Factory Part #: 21807G1P (Replaced # 21807G1)
This includes the following models: 4 Caddy, TXT 2+2 & Clays Car, 804, Tuff 1, the WorkHorse & MPT models 800 (4-cycle gas only) & the 1200. Also includes the Cushman Commander gas 280 & 2200 model trucks, the Jacobson 1110 gas truck and the Brouwer LX1200 truck--all made by E-Z-GO for these companies.
This hub/drum will not work on the E-Z-GO ST350 big wheel trucks, nor the ST480 or ST 4x4 trucks with hydraulic brakes. Also not suitable for the 800 and 900 series heavy duty gas powered burden carriers in the E-Z-GO product line.
This brake hub has a 15/16" center hole with an internal 30 tooth 'star' spline to interface with the axle. It is held in place by a castellated nut (3/4" x 16tpi) and a thick (.118") flat washer. The earlier 2-cycle gas and all the electric model hub/drums have a smaller hole and are not interchangeable with this hub/drum.